Integration of 2N intercom Helios IP with Wildix IP PBX

2N® Helios IP intercom can be fully integrated into Wildix VoIP PBX.

2N intercom operates as a SIP subscriber and can stream its video to the IP phone.

No additional equipment is needed.


Updated: November 2017


Tested versions:

  • WMS 3.84
  • 2N Helios IP Base firmware 2.19
  • WP600AXX Phone App v. 2.7.92

Supported features:

  • Audio call
  • Video call
  • DTMF transfer

Step 1: WMS Configuration

1. Add a new user (intercom user)

  • Go to WMS > Users and click on + to add a new user:

  • Fill in the fields:
    • Full name: name of the user
    • Extension: extension number used by the intercom
    • Dialplan: select the Dialplan procedure used by the intercom* (“users” by default):

2. Create a Dialplan procedure to manage calls from the intercom

  • Go to WMS > Dialplan > Dialplan rules and add a new procedure, example:


  • 500: is the phone number called from the intercom
  • Call group (test): is the call group that receives calls from the intercom (it can be an extension, several extensions, or several call groups…)

Note: you can also add Dial the phone application instead of Call group and set a specified extension.

  • Go to WMS > Users, select the intercom extension and select the newly created Dialplan procedure to be used for outgoing calls


Note: In case you don’t want to create a new procedure, you can add Number and Application to the Dialplan procedure used by the intercom (“users” for example).

Step 2. Intercom configuration

1. Connect to the web interface

To be able to connect, you have to know the IP address released to the intercom by the DHCP server used in your network (router or PBX).

Recommended browsers: the latest version of Chrome, Firefox or IE 9+.

First time access credentials: admin : 2n.

Note that upon your first login you are advised to change the default password.

Screen Shot 2017-01-02 at 16.52.18.png

2. Check for updates

Go to System > Maintenance

1) Click Check Now (Check Firmware Online) to check if there is a new firmware version available and to update the intercom:

Screen Shot 2017-01-02 at 16.53.49.png

Note: Update process takes around 30 seconds. During the update procedure the intercom is restarted.

3. SIP Server Setting

  • Go to Services > Phone > SIP 1

Fill out the fields as described below:

Important: use the SIP password of intercom extension, not the WEB password!

How to generate the SIP Password:

  • Go to WMS > Users and select the intercom extension (409 in our example)
  • Click Set passwords
  • Click on Generate near SIP/VoIP, then click Ok (copy this password from WMS and use it in the field SIP/VoIP Password (PASTE))

Screen Shot 2017-01-03 at 14.45.52.png

  • Go to WMS > Users

Check that the intercom is successfully registered to the system:

Screen Shot 2017-01-03 at 14.46.49.png

Note: status of the user is green which means that the intercom is successfully registered; focus the mouse on the status to see device’s name, IP address and the transport method.

  • Go back to the intercom web interface, Services > Phone > Audio:

Enable the option SIP INFO (RFC-2976) in DTMF Receiving section and click Save:

4. Quick Dial Button Setting

The intercom is equipped with quick dial buttons. Pressing a quick dial button places a call to the specified phone number.

Go to Directory > User > Position 1 (position 1 corresponds to quick dial button 1)

Fill the fields Name and Phone Number and click Save:

Screen Shot 2017-01-02 at 17.12.06.png

5. Electric Lock Switching Settings

An electric lock can be attached to the intercom and controlled by a code dialed from Wildix IP phones.

Go to Hardware > Switches > Switch 1:

Enter the code, for example “1234” under Switch Codes section and click Save:

Note: Make sure the box “Legacy Switch Code” is activated in Advanced Settings section. When this box is checked, the first code listed above does not require confirmation by pressing “*” from the phone. If the box is not check, it might be necessary to press “*” from the phone to confirm the door opening.

Step 3. Door open function from Wildix IP phones/ Collaboration

Go to WMS > Dialplan, select the procedure used for outgoing calls by the intercom extension (“doorphone” in our example).

You can open the door from any Wildix device, including WP, W-AIR, Web phone by answering a call and entering a code specified in Electric Lock Switching Settings of the intercom, in the format: *[code]#, in our example: 1234.

Unlock button for WP600AXX / Collaboration

You can add an unlock button on WP600AXX/ Collaboration, allowing you to open the door from the call management window.

Go to WMS > Dialplan and add Custom Application to the Dialplan procedure used by the intercom SIPAddHeader(Unlock-Button:), for example:

SIPAddHeader(Unlock-Button:*1234#), where “1234” is DTMF.

Here is what Unlock button looks like on WP600AXX and in Collaboration:

unlock-button.pngScreen Shot 2017-11-03 at 10.png

Video streaming before answer on WP600AXX / Collaboration / Android App

You can display an incoming video stream before answer on WP600AXX/ Collaboration/ Android mobile application:

  • Go to Services > HTTP API (2N® Helios IP web interface)
  • Enable Camera API and choose Unsecure (TCP) Connection type and Basic authentication, click Save:

Screen Shot 2017-11-02 at 5.22.39 PM.png

  • Go forward to the next tab Account 1 and check the box “Account Enabled”
  • Fill in User settings: User name and password and click Save

Screen Shot 2017-11-02 at 6.47.56 PM.png

  • Go to WMS > Dialplan and add Custom application to the Dialplan procedure used by the intercom SIPAddHeader(Camera:), for example:



  • 409:admin – User name and password for access to the intercom, set up in Services > HTTP API > Account 1
  • – IP address of the intercom
  • /api/camera/snapshot – function which allows downloading images from an internal or external IP camera connected to the intercom
  • width=1280&height=960 – video resolution

Dialplan example with Unlock button and Video streaming before answer

Screen Shot 2017-11-02 at 6.50.49 PM.png


  • “500” – is the number specified in the quick dial button menu of the intercom (the number called by the intercom)
  • “Custom application” – SIPAddHeader(Unlock-Button:*1234#) – adds unlock button to call dialog
  • “Custom application” –

SIPAddHeader(Camera:http://409:admin@ – enables video preview before answer

  • “Dial the phone” – 115 – is the call destination for answering calls from the doorphone; you can specify your own destination (an extension, several extensions, a call group…)
    1 Star2 Stars3 Stars4 Stars5 Stars (2 votes, average: 5.00 out of 5)